New Era Tiles & Finishes Limited

Description

One Step Spray Deck is a pre-blended decking system that incorporates dry resin technology eliminating the need for liquid additives. One Step Spray Deck is sprayed or trowel applied over new or existing concrete surfaces. Available in various colors, this product is designed for use on commercial walkways, driveways, pool patios and similar decks.

CHARACTERISTICS:
• One Step mixing, just add water
• Available in many colors
• Superior bonding & flexibility
• Anti skid surface
• Low maintenance
• Unlimited Designs
• Eases of application – minimum down time
• Fast curing, foot traffic – 24 hours, vehicle traffic 48 hours. time may vary depending on weather conditions.
• Freeze – thaw resistant
• Resistant to mildew.

SURFACE PREPARATION:
All areas to be coated should be free of oil, grease, dirt, loose paint and efflorescence. This can be accomplished by acid etching and pressure washing at 2500 – 3000 psi. Make sure the acid has been neutralized and all residue is thoroughly rinsed off prior to application. Do not apply over standing water.

MIXING:

In a clean five gallon pail, thoroughly mix a 50 lb. bag of dry mix with approximately 4 quarts of cool potable water until mixture is free of lumps. ONLY MIX AMOUNT OF MATERIAL THAT CAN APPLIED WITHIN 30 MINUTES OF MIXING.Let mix set for 2 minutes, re-mix again with drill for 1 minute. mix on slow speed to ensure air is not entrained into the mix.

APPLICATION:
Immediately after mixing, fill hopper with mix and begin spraying, covering approximately 75% of concrete surface. Depending on temperature, substrate or exposure to the sun, you can begin to knock down material with trowel as soon as material is sprayed. Test surface for dryness (surface may be dry in approximately 1 hour) Once surface is dry, lightly scrape to remove any loose material or ridges. Using a roller or airless sprayer, apply two thin coats of SGM Color Guard. Make sure to let first coat dry completely.

CURING:
Minimum curing is achieved in 8 hours. It is best to keep foot traffic off until next day. Depending on temperature, allow 2 days for automobile or heavy traffic use.

COVERAGE:
Each bag of dry mix covers approximately 150 – 225 sq. ft. (Desired texture and thickness effect coverage rates). Note: Coverage may vary according to condition and porosity of the substrate.

LIMITATIONS:
One Step Spray Deck should only be applied to concrete surfaces that have cured for at least 7 days. Do not apply when the surface or air temperature 
is below 40F degrees or above 110F degrees. Do not apply if frost is expected within 24 hours. Application thickness should not exceed 1/4 inch. on driveway surfaces and high traffic areas a knock down finish is recommended.

CLEAN UP & STORAGE: 
Keep from freezing and do not store in direct sunlight. clean hands, tools and containers with warm soapy water.

SHELF LIFE: 
One year in unopened properly stored container.

CAUTION:
WARNING – EYE IRRITANT CONTAINS PORTLAND CEMENT Product is alkaline on contact with water. Avoid splashing into eyes or contact with skin. During mixing or application avoid contact with eyes. In case of such contact, flood eyes repeatedly with water and call physician. Wash thoroughly after handling and before smoking or eating. Do not take internally. Contains free Silica. Avoid breathing dust. Prolonged exposure to dust may cause delayed lung disease (Silicosis). Wear NIOSH approved mask for Silica dust. Follow OSHA Safety and Health Standards. KEEP OUT OF REACH OF CHILDREN.

MAINTENANCE:
One Step Spray Deck lifetime will be greatly enhanced through proper and regular maintenance. Test and record water chemistry values once a week, and 
adjust as indicated per water-balance table recommendations. Brush entire pool, walls and floor weekly. Remove any debris and foreign materials 
immediately to prevent staining. Check and maintain filter, pump motor and skimmer baskets to maintain proper flow and filtering action. If unable to 
perform regular weekly maintenance, the services of a qualified licensed pool service professional should be obtained.

AVAILABLE IN COLORS WHITE, DESERT SAND AND ALMOND

SGM COLOUR GUARD RESIN IS USED IN CONJUNCTION TO SEAL THE COLOUR.