No product in cart
Aquamix 3 / 4 Poultice
-
(0s)
- Add your review
Aqua Mix Poultice Stain Remover is a dual purpose, non-acidic stain remover. It is an absorptive clay that is designed to remove deep-set oil and grease stains without scrubbing. It is also a fine abrasive cleaning powder that removes stubborn surface stains and light grout haze. KEY FEATURES • Effectively removes deep-set oil and […]
Available: In stock
#Code Products:
Description
Aqua Mix Poultice Stain Remover is a dual purpose,
non-acidic stain remover. It is an absorptive clay that is
designed to remove deep-set oil and grease stains
without scrubbing. It is also a fine abrasive cleaning
powder that removes stubborn surface stains and light
grout haze.
KEY FEATURES
• Effectively removes deep-set oil and grease stains
• Safe, non-acidic, abrasive cleaning powder
• Excellent cleaning additive
AREAS OF USE
• All natural stone (such as granite, limestone, marble,
slate, and travertine), porcelain, quarry, Saltillo, terra
cotta, cement pavers, masonry surfaces, and other
porous tile and grout
LIMITATIONS
• Do not allow product to come in contact with any
non-recommended surface
• Extreme care should be taken with dark marble
(especially green), as it may be more sensitive to
moisture
• Light abrasive action or high RPMs on the surface of
some marbles may dull the high polished finish
Aqua Mix Poultice Stain Remover is a dual purpose, non-acidic stain remover. It is an absorptive clay that is designed to remove deep-set oil and grease stains without scrubbing. It is also a fine abrasive cleaning powder that removes stubborn surface stains and light grout haze.
KEY FEATURES
• Effectively removes deep-set oil and grease stains
• Safe, non-acidic, abrasive cleaning powder
• Excellent cleaning additive
AREAS OF USE
• All natural stone (such as granite, limestone, marble, slate, and travertine), porcelain, quarry, Saltillo, terra cotta, cement pavers, masonry surfaces, and other porous tile and grout
LIMITATIONS
• Do not allow product to come in contact with any non-recommended surface
• Extreme care should be taken with dark marble (especially green), as it may be more sensitive to moisture
• Light abrasive action or high RPMs on the surface of some marbles may dull the high polished finish Aqua Mix Poultice Stain Remover is a dual purpose, non-acidic stain remover. It is an absorptive clay that is designed to remove deep-set oil and grease stains without scrubbing. It is also a fine abrasive cleaning powder that removes stubborn surface stains and light grout haze.
Installation
METHODS
Application
FOR REMOVING DEEP-SET OIL AND GREASE STAINS:
Read entire label before using. Mix Poultice Stain Remover powder with water to form a thick, pliable paste – quantity of Poultice Stain Remover needed will depend on size of stain. Apply a 1/4-inch (6 mm) thick layer of paste directly over stain with at least a 1-inch (25 mm) overlap beyond edge of stain. Cover with
plastic or wax paper. Poke a few very small holes in plastic cover to allow for minimum air exposure. Allow paste to stand on stain for 24 to 48 hours. Remove Poultice Stain Remover with plastic spatula or plastic
putty knife and wash off residue with clean water. Repeat procedure if necessary. If area darkens from
absorbed moisture, it should dry completely within 2 to 4 days.
FOR REMOVING STUBBORN SURFACE STAINS AND GROUT RESIDUE ON ACID SENSITIVE STONE:
Read entire label before using. Protect surrounding areas from splattering to minimize cleanup. Pre-wet a manageable area of the surface with water (approximately 10 sq. ft. (1 m2) and sprinkle Poultice Stain Remover onto the area mixing into a thin slurry. If surface is vertical, mix slurry in a container and apply to pre-wet surface. Agitate by hand or with low RPM (300-750 RPM) buffer using a white nylon scrub pad. Keep surface wet throughout buffing process. Remove Poultice Stain Remover solution with clean towels or sponge and rinse twice with clean water. A wet-dry vacuum may be used. Polish surface dry with clean, dry towels or buff with soft lambs wool pad. Rinse with clean water and buff dry with clean towels NOTE:Poultice Stain Remover is an excellent additive that will boost the cleaning power of many of the Aqua Mix cleaners such as Phosphoric Acid Substitute, Heavy Duty Tile & Grout Cleaner, and Stone Deep Clean.
Coverage
Approximately 35 to 100 sq. ft. (3 m2 to 9 m2) per pound (.45 kg) depending on dilution.
Handling and Storage
• Close container tightly after each use
• Store in original container only
• Store and use in temperatures between 40 °F and 90 °F (4 °C and 32 °C)
CAUTION MAY BE HARMFUL IF SWALLOWED. MAY IRRITATE EYES AND SKIN. Wear skin and eye protection. Contains barium sulfate and silicic acid. If in eyes, flush with water for at least 15 minutes. If on skin, wash with soap and water. If irritation persists, seek medical attention. If swallowed, DO NOT induce vomiting. Seek medical attention.
Be the first to review “Aquamix 3 / 4 Poultice” Cancel reply
You must be logged in to post a review.
No Tag
Reviews
There are no reviews yet.