New Era Tiles & Finishes Limited

Description

Aqua Mix Grout Colorant Pre-Treat Cleaner is an effective ready-to-use cleaner designed to remove dirt, soil, soap scum and hard water deposits from grout joints. Prepares non-epoxy grout joints by lightly etching the surface for a superior Aqua Mix Grout Colorant bond.

KEY FEATURES

• Ensures a superior grout colorant bond

• Easy spray-on application

• Ideal for countertops, backsplashes, and showers

AREAS OF USE

•  Sanded and un-sanded grout joints

LIMITATIONS

• Do not allow product to come in contact with any non-recommended surface

• Do not mix with ammoniated cleaners, such as bleach, as harmful fumes will result

• Not recommended on acid sensitive stone & metallic glazes. Will etch, lighten, or change the color of metallic glazes and some natural stones such as marble and limestone.

Installation

METHODS

Application

Read entire label before using. Allow newly grouted installation to cure a minimum of 10 days. Sweep, vacuum or wipe surface to remove loose debris. Prewet surface with water. Spray Grout Colorant Pre-Treat Cleaner directly onto grout joints in manageable area of approximately 5 to 6 sq. ft (0.5 m to 1 m). Allow to dwell 1 to 2 minutes. Scrub grout joints with nylon or natural-bristle scrub brush or white nylon scrub pad.  Do not allow solution to dry on surface. Mop up dirty solution. Rinse thoroughly with clean water, agitating with white nylon scrub pad or brush to ensure removal of cleaning agents and acid. Completely dry surface with clean, dry absorbent towels. Allow a minimum of two hours drying time prior to applying Aqua Mix Grout Colorant. For preparing epoxy grout joints, use AquaMix Sealer & Coating Remover.

Coverage

Approximately 50 to 300 sq. ft. (5 m2 to 28 m2) of tiled area per 8 oz (237 ml).

Handling and Storage

• Close container tightly after each use

• Store in original container only

• Store and use between temperatures of 40° F and 90° F (4° C and 32° C)

CAUTION

MAY BE HARMFUL IF SWALLOWED. MAY IRRITATE EYES AND SKIN. Wear skin and eye protection. Contains urea monohydrochloride. If in eyes, flush with water for at least 15 minutes. If on skin, wash with soap and water. If irritation persists, seek medical attention. If swallowed, DO NOT induce vomiting. Seek medical attention.